| Click here to return to the Buggies Menu or choose next/previous
buggy from the buttons below to see more of The EDGE Product's buggies. You may also click on the links above to
visit other sections of our site. Thank you. [ Previous Buggy ] [ Buggies Menu ] [ Next Buggy ]
THE SIX WHEEL DRIVE INTRODUCTION
The ultimate go anywhere machine, all six wheels driven, skid steer, floats & swims in water,
fully sealed & goes where you can't walk!!! Suitable motors ; 500cc - 1000cc bike.
The machine for the adventurous at heart. The go-anywhere vehicle that takes you to those hard
to get to areas that used to take days of hard bush-walking to reach.
All six wheels are driven to give maximum traction in places even a four wheel drive won’t go.
Not only is it six wheel drive but it is also amphibious. The Six Wheel Drive floats and swims across swamps,
streams, dams and rivers.
A simple machine to build using a motorcycle Motor for power and a car Differential for
splitting the Drive and Chains to all six wheels.
An ideal machine for exploring the outback, a practical work vehicle for the farm, for the keen
fisherman or the adventurous prospector, The Six Wheel Drive will take you where you can’t walk.
PLAN PRICES
( USA residents will only pay approx 75% of list prices quoted due to EXCHANGE rates. Click here to check the value in your currency)
How about checking out the websites of some of our happy clients...
 A Custom 8x8 Based on the 6x6!
SPECIFICATIONS:
 Frame:
Box section steel Chassis with single tubular Rollbar
Body: Plywood panels over Chassis structure, fibreglassed over to seal
Steering: Skid steer with two levers operating right and left brakes
Motor: Road bike Motor from 500cc to 1000cc, preferably water cooled
Transmission: Motorcycle Gearbox driving car Differential then Chain Drive to all six
wheels
Suspension: No suspension, relies on 2 ply ATV Tyres
Brakes: Car Discs and Hydraulic Calipers, Disc on either side of Differential to
control steering
Wheels: Either 22x11x8 or 25x12x9 ATV Tyres & Rims
Overall Length: 2700mm
Overall Width: 1440mm
Overall Height: 1100mm
Track (rear): 1200mm
Wheelbase: 1480mm
Ground Clearance: 150mm
Approx. Weight: 380kg
Top Speed: 50kph
Acceleration: 0-50kph in 15 seconds
Buying the raw materials, fabricating and welding the 6x6 parts yourself to the pans will cost approximately $2,000 to $2,500 Australian minus motor to construct the complete vehicle.
The Six Wheel Drive features over 30 pages of detailed drawings featuring the Chassis,
gearshift, axles, sprockets, brakes & steering, bodywork. Complete with parts list, nuts & bolts list & material
list.
THE SIX WHEEL DRIVE COMPONENT PARTS LIST
 To
Download a PDF copy to your PC: Right-mouse click on the PDF image and select "Save Link (Target) As..."
To open PDF files you require at least Adobe Acrobat Reader, available as a free download from
http://www.adobe.com/. If you don't wish to
download this please just use the information below, it is the same information as in the download.
All these parts can be ordered securely from here.
|
PART No. |
QTY |
PART DESCRIPTION |
LIST
PRICE |
| UC206 |
Pair |
Rear Axle Bearings 1 1/4 (2) - 6 pairs required |
45.00 |
| F206J |
Pair |
Rear Axle Bearing Flanges to suit bearings - 6 pairs required |
28.00 |
| RWH-01 |
Pair |
Wheel hubs only, 1 1/4" bore, 5 stud H-T pattern with studs & nuts - 3 pairs
required |
95.00 |
| MSC-01 |
Each |
Master Cylinder 5/8” Girling type - (2 required) |
45.00 |
| CAL-01 |
Each |
Brake Caliper, Hydraulic single piston, floating mount type, complete with
performance metal pads & bleed screw - (2 required) |
120.00 |
| BB-01 |
Each |
Banjo Bolt with crush washers, used to connect brake hose to caliper & Master
Cylinder, 3/8” UNF - (2 required per installation) |
7.00 |
| HYP-14 |
Each |
Gear Change Lever |
14.00 |
| PH585B |
Each |
8mm Female Rose Joint End, used on gear change linkage (2 required per set up) |
16.00 |
| C-LEVER |
Each |
Clutch Lever, motorcycle shorty type, fits onto gear change lever |
20.00 |
The following wheels and Tyres are the recommended set for the 6X6 |
| WR5-03 |
Each |
9x9” ATV Rim, 5 stud, steel - (6 required) |
75.00 |
| TY9-04 |
Each |
25x12.0x9 Trailclaw (4 ply) - (6 required) |
125.00 |
| TV-01 |
Each |
Tubeless Valves, chrome plated - (6 required) |
3.00 |
All the above parts can be securely ordered from here.
All Prices In Australian Dollars.
( USA residents will only pay approx 75% of list prices quoted due to exchange
rates. )
Contact us for a quote on freight charges to your area, we freight Australia wide daily.
See our Conditions of Sale.
Click here to return to the Buggies Menu or choose next/previous buggy from the
buttons below to see more of The EDGE Product's buggies. You may also click on the links at the very bottom to visit
other sections of our site.
[ Previous Buggy ] [ Buggies Menu ] [ Next Buggy ]
|
